Design feature

Elements area

Taxonomy

Genre

Code

Scope note(s)

    Source note(s)

      Display note(s)

        Hierarchical terms

        Design feature

        Equivalent terms

        Design feature

          Associated terms

          Design feature

            82 Archival description results for Design feature

            Massimo Osti Ninja Fleece
            2017.352.4 · Item · 1995-1998
            Part of Westminster Menswear Archive
            Dark blue hooded fleece jacket made from cotton polyester mix knit jersey which fastens centre front with velcro and a black Lampo zip. The hood is edged in black elastic and can be fastened so that it covers the neck and lower part of the face. It has two pockets at the hips which fasten with Lampo zips. The bottom hem has a drawstring. It is not lined and the interior of the fleece is grey.
            Country of Design: Italy
            Country of Manufacture: Italy
            Keywords: Casual, leisure, knitwear             Massimo Osti Production
            Levi's ICD+ Producer Jacket
            2019.144 · Item · 2000
            Part of Westminster Menswear Archive

            Long black jacket made of Codura outer with detachable hood and stand collar. It fastens centre front with a black zip covered by wide storm flap placket, the front fastening comes to the top of the collar. It has two black moulded attachments sewn one on either side of the zip at collar bone level for holding earphones. The front has two large pockets across the whole chest which come down to the waist. Velcro patch on the right centre chest. Pocket to the outer upper arm on the right side. The cuffs fasten with velcro. The hood attaches with a black zip across the back of the neck and has a wire stiffener around the rim. It has a draw cord with black plastic stops at each end and is lined in black mesh.

            Pockets are designed to house wearable technology and electronics (all missing).

             Levi's
            C.P. Company Urban Protection 'Beekeeper' Jacket - Hood
            2016.050.2 · Item · 2000
            Part of Westminster Menswear Archive

            Bee-keepers' hood which can be removed from the jacket via a zip. It has nylon mesh sections that separate the bottom and the top of the hood which is cut in the style of a sou'wester hat. Hood can be adjusted by flaps that can be velcroed in numerous ways.

            Country of Design: Italy

             C.P. Company
            Oberon Radiant Heat Proximity Helmet
            2019.106.3 · Item · nd [2010-2016]
            Part of Westminster Menswear Archive

            Helmet or hood made of silver coloured heat reflective material. It has a rectangular shaped gold coloured reflective curved visor window in the front. The hood has a peaked top with a hanging loop in dark orange material and panels that come over the chest and upper back. The back panel has two long tabs with elasticated sections which attach with metal press studs to the front panel, they thread under the arms to secure the hood on the shoulders.

            The inside of the hood has a black plastic structure to sit on the head and lined in red fabric.
            Country of Design: United States
            Country of Manufacture: United States

             Oberon
            Bee-keeper Overall Suit with Removable Protective Hood
            2019.30 · Item · 2018
            Part of Westminster Menswear Archive
            White and cream coloured protective overall designed to be worn for bee-keeping. Made with three layers of fabric, a layer of foam mesh, with a finer mesh layer on each side. There are two patch pockets with a flap on each chest side, a square with a pocket on each trouser leg, knee reinforcements, lower leg reinforcements, sleeve cuff and collar, all in white drill fabric. The waist is elasticated from the side seams across the back body. The centre front closes with a double ended zip, with circular zip pulls. The overall is finished with a detachable hood which zips all around the neck, and closes at the front with velcro. The hood is circular, with a black mesh section at the front for vision. The top of the hood is white drill with a head shape in the centre.
            Made in Pakistan.             Designer unknown
            Boneville Parka
            2018.91 · Item · undated
            Part of Westminster Menswear Archive
            Hooded parka with three wooden toggle buttons secured with cord through eyelets with bartack. It has a front zip fastening and waisted internal drawstring. The hood is lined with self fabric, shaped with a topstitched dart and has eight black 'BNV' poppers at the brim, secured through a green cotton facing. The coat has an inner collar and panels that have been top stitched down across the shoulder and back to reinforce it (similar to donkey jacket detailing). The two front patch pockets are strengthened with tape at the openings and lined with a brushed drill. The sleeves are constructed from one piece and feature adjustable tabs at the cuffs secured with two black 'Navy Arctic' buttons. The green lining is comprised of the top half in a green wool blend and the bottom half in quilted nylon. There are two vent hole under each armhole. The right pocket front edge is sewn to the front body, however the bottom and back edge are sewn through the body and back lining indicating a repair, manufacturer fault or sample garment.
            Country of Design: Italy
            Country of Manufacture: Italy             Boneville
            Pro Player Florida Gators Anorak
            2016.270 · Item · undated
            Part of Westminster Menswear Archive
            Transparent white short raincoat with hood and blue mesh lining. It fastens centre front with a large orange zip, has two patch pockets on the front at hip level and the hood has a drawstring with blue plastic toggles. There is an emblem of an alligator head in green on an orange background with 'GATORS' underneath in blue italics on the left chest. The back has 'GATORS' in large italic orange lettering and the same alligator head underneath.
            Country of Design: United States
            Country of Manufacture: China             Pro Player
            Yoko Hi-Viz Jacket
            2020.85 · Item · 2019
            Part of Westminster Menswear Archive
            Jacket made of orange high visibility polyester with grey reflective strips around the arms, chest and shoulders. It fastens centre front with a black zip, wide storm flap and six black press studs with 'YOKO' engraved into them. It has a hood which folds into the collar and is lined in black polyester with diamond quilting. The interlining is polyester wadding. The cuffs and bottom hem are elasticated. Yoko
            U.S. Army M-1951 Parka Shell
            2020.74.1 · Item · 1953
            Part of Westminster Menswear Archive

            Dark olive green cotton parka with hood - to be worn with liner 2020.74.2 and fur trimmed hood 2020.74.3. The parka fastens centre front with a heavy silver coloured metal zip, with 'CONMAR' etched into the zip head, and seven metal press studs with 'UNITED CARR' etched into the back. It has two large angled flapped pockets on each side of the centre opening at waist level and a U.S. ARMY label in yellow on black sewn on to the left chest. There are drawstrings at the waist, around the hood, and around the bottom hem. The hood drawstrings have leather stoppers.

            The back of the parka is longer than the front and curves to a point with a small V creating the 'fishtail'. The inside has green plastic buttons around the sides, neck, hood and cuffs to button on the hood liner and body liner. The sleeve cuffs fasten with an elasticated pull tab and large olive green plastic button.

            Handwritten in dark pen inside the back of the neck is 1-HQ209. Manufacturers stamp in black on the inside of the hood at the back of the neck.

             Albert Turner & Co. Inc.