Elements area
Taxonomy
Code
Scope note(s)
Source note(s)
Display note(s)
Hierarchical terms
Outerwear
- NT Bomber Jacket
- NT Cagoule
- NT Cape
- NT Coat
- NT Denim Jacket
- NT Gilet
- NT Jacket
- NT Leather Jacket
- NT Liner
- NT Smock
Black PVC inflatable jacket with a stand collar and hood. Across the back is printed in white lettering: 'MICHIKO LONDON / KOSHINO / DO NOT CLOSE TO FIRE / DO NOT SWIM / YOU CAN WEAR IN THE RAIN'. The collar has a zip at the back that the hood folds into. It fastens centre front with five metal press studs and has a draw cord around the bottom hem. There are two large patch pockets with flaps at the waist and it has clear plastic nozzles on the arms and sides to be blown into to inflate the jacket. There are five wide horizontal inflatable channels across the back, two across each arm, four across the chest and two large inflatable panels under the pockets. Welded or sealed seams.
Small black drawstring bag for storage printed in white lettering on one side: 'MICHIKOLONDON / KOSHINO / DO NOT CLOSE TO FIRE / DO NOT SWIM / YOU CAN WEAR IN THE RAIN'.
Michiko KoshinoShort purple coat with down feather interlining, pink lining and hood (production sample including re-used linings from left-over fabric from previous seasons). The parka has ultrasonic welded seams. It closes centre front with a zip and a double flap wind protection covering which closes with magnetic fastenings. At the neck of the hood are two purple '7L' press stud fastenings and there is one at the bottom hem. Each side has two waterproof zipped pockets, one horizontal, one vertical. The end of all zips have a matt garage to ensure waterproof quality. There is also an invisible zipped pocket above the vertical pocket.
The hood has a stiff peak insert, and two stoppered elastic draw cords. There is another draw cord around the waist, which feeds down a channel sewn into the centre front facing. There is a channel pocket across the back, which closes with a zip on each end. The inside lining has a removable elasticated waist snow skirt which fastens at the front with four snap fasteners. There are inside zipped pockets on each side and a headphone hole on the left. The sleeve cuffs have a cotton elastane grey inner layer mitten with thumb hole.
Country of Design: England
Country of Manufacture: China (garment), Switzerland (fabric)
Manufactured in Shenzhen, China by A-Garment.
Black lightly padded down-filled jacket with curved raglan sleeve seam. The body has a folded flap which conceals two zipped pockets, one opening downwards, the other upwards. The flap is secured to the front with a short line of top stitching just below the lower zip. The centre front closes with a black plastic zip, covered with a flap secured with four separate lengths of velcro. The zip continues up to the top of the hood front. The lining is quilted in a squared stitch pattern.
There is a strap on the inside from the waist to the shoulder, secured with a press stud, which allows the coat to be transformed into a backpack. To transform, the strap is undone and brought to the outside, then fastened around the hem. The centre front is zipped, arms turned inside the jacket. Made in Italy.
Mandarina DuckLong black elongated bomber jacket coat. The front closes with a chunky brass coloured metal zip, angled and to the right side. The left front side has a seam which mimics the angle of the zip. The top body has a pocket with a flap on each side, closed with a gloss black press stud. The lower body has a welt pocket, also with a press stud.
The waist of the coat has a chunky belt in matching fabric, with a black leather buckle. The left sleeve has a pocket on the sleeve with four pen slots and a zip on the inside edge. The cuffs and hem of the coat are a black rib. The coat has a large roll collar in a black faux fur. The jacket is lined in red, with a Junior Gaultier Joker embroidery at the centre back. Made in Italy.
Junior GaultierGreen wool bespoke tailored jacket (part of a two piece suit) with large single breasted lapels. The lapels are wide and curve in towards the button closure. The collar has a peak point with a single button hole on the left side. The centre front closes with a single button with hand stitched button hole.
The jacket overall shape is slim, narrow at the shoulders and fitted on the waist. The back of the jacket has a yoke seam and a seam at the waist, both finished with a hand pick stitch. The section between is formed of three vertical pleats, a variation of an American sport jacket. Below the waist seam, the back seam becomes a double vent, secured at the top with a row of hand stitching.
The front body of the jacket has a patch pocket with rounded corners and a box pleat. The edges of the pocket are all hand pick stitched. The sleeve has a single functioning button. All edges are secured with hand stitching. With original hanger 2019.63.16. Designed and made in England.
Tommy Nutter