Jacket

Elements area

Taxonomy

Code

Scope note(s)

    Source note(s)

      Display note(s)

        Hierarchical terms

        Jacket

        Jacket

          Equivalent terms

          Jacket

            Associated terms

            Jacket

              598 Archival description results for Jacket

              598 results directly related Exclude narrower terms
              2019.132 · Item · nd [1994-2018]
              Part of Westminster Menswear Archive

              Washed out black cotton long jacket with black cotton double tape detailing. The jacket has a stand collar with hood that can be folded and zipped into the collar. The hood is trimmed on the inside with a bright orange camouflage style printed fabric and has a drawcord fastening around the outer edge with black plastic stoppers.

              The jacket fastens centre front with a zip and six press studs, there is a pointed tab across the collar at the neck. The front of the jacket has four large flapped pockets, two at the chest and two at the hips. The chest pockets are on an angle and fasten with press studs, the flap on the left also has two metal eyelets in the flap. The hip pockets fasten with black plastic buttons and loops, the cuffs fasten with black plastic buttons. On the left chest there is a short tab which attaches to the jacket with two black plastic buttons.

              Across the front, shoulders, around the cuffs and in two lines down the back of the jacket are angled lines of wide black cotton tape. Some of the tapes have narrow black cotton tape sewn down the centres. These lines cross each other and are stitched on the edges. At the back it has inverted pleats at the shoulders and there are two short button tabs at each side of the back waist for adjustment.

              Maharishi
              London Fire Brigade Jacket
              2019.96 · Item · nd [2010-2018]
              Part of Westminster Menswear Archive
              Black jacket with high stand collar and hi-viz reflective strips. The jacket has a throat guard across the front neck of the collar and a wide placket covering the centre front fastening. It has a black plastic clip attachment sewn to the centre front chest and two velcro fastening loops on the front. The sleeves have additional inner cuffs made of black rib knit bands with thumb loops. Around the chest hem and the bottom of the sleeves are wide bands of yellow hi-vis with a centre stripe of silver reflective material. On the right chest and right arm printed in white are the letters L F B in squares over 'LONDON FIRE BRIGADE'. On the left sleeve is an angled flapped pocket with a printed badge emblem of the London Fire Brigade. The back of the jacket has two vertical strips of yellow hi-viz with silver reflective strips down each side and a stripe around the bottom hem. Across the upper back is printed 'FIRE' in silver reflective material. Designer unknown
              2020.5.4 · Item · 1972
              Part of Westminster Menswear Archive
              Single breasted bespoke tailored jacket made of cream, brown and black check tweed wool with detachable belt. The jacket has a wide turn down collar and lapel and fastens centre front with three buttons. It has two large patch pockets with flaps at the hips and a centre vent in the back. There are four belt loops at the waist. The belt fastens with a buckle made of metal covered in leather (the leather is very worn) with hand stitched eyelet holes. Tailors label with date on the inside lining. Hayward
              2020.14.1 · Item · nd [1965-1969]
              Part of Westminster Menswear Archive
              Single breasted tailored blazer jacket made in orange, yellow and beige wide striped fabric. The stripes are on the vertical for the body of the blazer and the sleeves. The blazer has a wide collar and narrower lapel, both with curved edges and a very high break point. The three centre front fastening buttons are hidden by a concealed fly and there are two vertical welted inset pockets at the hips. The blazer fronts are curved, the cuffs have short vents with one button and there is a centre back inverted pleat from the waist to the hem in the back seam. It is lined in light brown beige rayon. Sportive Male by Paul
              2020.15.1 · Item · nd [1988-1994]
              Part of Westminster Menswear Archive
              Cropped black single breasted collarless jacket with high neck in two halves with tab tie fastenings down the back and sleeves. The jacket is made of black linen and rayon mix twill fabric. It fastens centre front with four silver coloured metal embossed buttons and has a patch pocket on the left chest. The centre back fastens with six pairs of short tabs which can be tied together. The forearm of each sleeve is vented and fasten with four pairs of tabs tied together. It has small shoulder pads. Size Medium.
              Country of Design: England
              Country of Manufacture: Japan
              Workers for Freedom
              2020.26.2 · Item · 1987
              Part of Westminster Menswear Archive
              C.P. Company Rubber Flax jacket with green collar and an argyle diamond pattern embroidered on the underside of the collar in green and red thread. It fastens centre front with five dark cream coloured buttons with three holes and has metal zipped vents in each side seam. There are four patch pockets on the front, the right chest pocket has an additional pocket sewn into the patch. Each cuff fastens with two smaller three-holed dark cream button. There are two spare buttons sewn into the right lower inside side seam. There is a large adhesive label attached to the inside left front. The underside of each armhole has two stitched eyelet holes. Size 52 C.P. Company
              2019.40 · Item · 1980-1989
              Part of Westminster Menswear Archive
              Black tailored double breasted jacket , with four buttons on each side, closing ting three buttons. There is a chest pocket on the left, and a pocket with flap on each side. The back panel has a rectangular cut out with five buckled straps holding it in shape. All hardware on straps is silver metal. The sleeves have three buttons at the cuff. The jacket is lined with a red, burgundy and light ground striped fabric, with an internal pocket on the right side. Designed in France. Made in Japan Jean Paul Gaultier
              2019.70 · Item · nd [1990-1999]
              Part of Westminster Menswear Archive

              Transformable jacket, waistcoat and jumpsuit in grey beige with yellow flecks. As a waistcoat it fastens with six buttons. The bottom of the waistcoat extends to form a jacket, which folds up over the waistcoat, closing at the centre front with a zip.

              The jacket has a zip pocket on each side, with the pocket bag top stitched to the body in a rectangle. The back of the jacket is separated, with the waistcoat back finished fully lined with a shaped hem, and jacket hem finished with a length of elastic.

              The garment opens out and can be worn as a jumpsuit, with the waistcoat on the torso, and the legs through the armholes of the jacket. The armholes close with a single button. The inside seams of the jacket are all finished with french seams, finished with top stitching. Designed in Paris, Made in Italy

              Jean Paul Gaultier Homme
              2018.86 · Item · 1999
              Part of Westminster Menswear Archive

              C.P. Company Urban Protection Atlas Jacket in black nylon that features an inflatable collar, with the inflatable device primarily designed to be removed from the body of the jacket and worn around the neck as a pillow when travelling. This can be removed from the high neck collar via a zip closure which runs along the top of the collar. The piece has slit pockets with popper closures on the front and four hidden pockets at the side that are secured with velcro which are ideally suited to its use as a travel jacket. There is also one large internal pocket that sits at the hem on the left side with velcro closure. Every pocket is lined with fleece. The cuffs have a single popper closure on each side and each popper is emblazoned with 'C.P. Company'. The jacket has a high-density double fleece lining and a detachable C.P. Company brand patch on the collar. The protective shell is made of Dynalfil TS-70 bonded to a nylon base, making the garment abrasion and rip-resistant as well and waterproof.

              Country of Design: Italy
              Country of Manufacture: Italy
              Keywords: Urban protection

              C.P. Company