Showing 15 results

Archival description
Ferrari, Moreno
Print preview
Card view Table view
1 results with digital objects Show results with digital objects
C.P. Company Transformables Coat / Boiler Suit
2020.17.2 · Item · Spring Summer 2000
Part of Westminster Menswear Archive

Semi-transparent white short coat that transforms into a boiler suit - overall - with legs unzipping from the inside, made of white nylon mesh bonded with a rubberised coating of 'Crystal Wind'. It has a stand collar and centre front zip, a vertical opening zipped pocket to the left chest, two large zipped patch pockets to the upper thigh level, and two zipped vertical inset pockets at hip level. There is a draw cord waist, draw cords around the cuffs, zipped vents to the cuffs, and oval patches to the outer elbows of the sleeves.

There is a white webbing harness over the shoulders with an H-shape at the back. The upper centre back has a horizontal zipped opening with wide flap and below that '000 C.P.' has been heat pressed in silver reflective vertical lettering. Original press sample label attached to inside upper back.
Country of Design: Italy
Country of Manufacture: Italy

 C.P. Company
C.P. Company Transformables Cape / Tent
2020.17.1 · Item · Spring Summer 2000
Part of Westminster Menswear Archive

Semi-transparent white cape with a hood, made from white nylon mesh bonded with a rubberised 'Crystal Wind' coating. The cape fastens at the centre front with six press studs and features two vertical welted zipped openings on the front chest. On the lower left side, the text '000 C.P.' is heat-pressed in silver reflective vertical lettering.

The cape is transformable into a tent with the addition of narrow aluminium rods that are threaded through channels around the bottom hem and along four sides, forming a domed structure. The hood unzips and flattens to create the top of the tent. An additional square of the same material, with metal eyelets at each corner and a cross shape of white webbing, is included. The piece is accompanied by a storage bag made from the same 'Crystal Wind' fabric, though the bag is in poor condition.
Country of Design: Italy
Country of Manufacture: Italy

 C.P. Company
C.P. Company Urban Protection Coat
2019.195 · Item · Autumn Winter 2001
Part of Westminster Menswear Archive
Black Dynafil nylon coat with zip off hood and turn down collar. The hood is unlined and has a black elasticated drawstring and small peak, it attaches to the coat with a black zip underneath the black polyester fleece collar. The coat has a hidden fly front opening with a double headed Lampo black zip fastening and a narrow line of black Velcro. There is a removable square 'C.P. Company' black badge that attaches with Velcro in the centre front chest on the fly. There are four large pockets to the front, the two upper are at chest level with triangular shaped patches on each side of the centre fly opening. Cuffs to each sleeve and a drawstring to the waist across the back of the coat. The coat is lined in black polyester fleece and there are two large patch pockets made of black double mesh on each side front. C.P. Company
C.P. Company Urban Protection Prototype Jacket
2019.146 · Item · 1997
Part of Westminster Menswear Archive
Black Dynafil nylon jacket with hood. The hood has black elastic drawstrings with black plastic toggles, there is also a drawstring around the bottom hem. The jacket closes centre front with a zip, Velcro pad at the bottom, and two press studs on the hood opening. The press studs are black with 'C.P. COMPANY' and '997' embossed on them. There is a pocket with flap on the left upper arm above the elbow. The front of the jacket has a horizontal placket which crosses the vertical placket of the zip at chest height - at the crossing point there is a square Velcro pad which would have attached the badge (badge missing). The back of the jacket has a storm flap over the shoulders. There are two vertical zipped pockets at the front at waist level. Cuffs fasten with Velcro tabs.
Lined in black polyester fleece. C.P. Company label in white on black in a flowing script.
Size 50.
Country of Design: Italy
Country of Manufacture: Italy C.P. Company
C.P. Company Orange Transformables Shoulderpack
2019.110 · Item · 2000
Part of Westminster Menswear Archive
Hooded gilet or waistcoat transformable. It can be converted into a shoulderpack - rucksack - through a system of zips, hooks and loops. Made of orange 'Crystal Wind' nylon mesh, originally coated in a translucent rubberised material bonded to the mesh. It has taped seams and pockets. On the back is the Transformables logo '000 C.P.' in a silver reflective material which has been hot-pressed onto the mesh. C.P. Company
C.P. Company Urban Protection Atlas Jacket
2018.86 · Item · 1999
Part of Westminster Menswear Archive

C.P. Company Urban Protection Atlas Jacket in black nylon that features an inflatable collar, with the inflatable device primarily designed to be removed from the body of the jacket and worn around the neck as a pillow when travelling. This can be removed from the high neck collar via a zip closure which runs along the top of the collar. The piece has slit pockets with popper closures on the front and four hidden pockets at the side that are secured with velcro which are ideally suited to its use as a travel jacket. There is also one large internal pocket that sits at the hem on the left side with velcro closure. Every pocket is lined with fleece. The cuffs have a single popper closure on each side and each popper is emblazoned with 'C.P. Company'. The jacket has a high-density double fleece lining and a detachable C.P. Company brand patch on the collar. The protective shell is made of Dynalfil TS-70 bonded to a nylon base, making the garment abrasion and rip-resistant as well and waterproof.

Country of Design: Italy
Country of Manufacture: Italy
Keywords: Urban protection

 C.P. Company
C.P. Company Urban Protection Jacket with Detachable Trousers
C.P. Company Urban Protection Jacket with Detachable Trousers
2018.6.Front · Piece · A/W 2000
Part of Westminster Menswear Archive
Black water resistant jacket with transformable features. The main feature of the jacket is the large detachable pouch on the left hand side which contains a pair of waterproof trouser legs that can be attached to the hem of the jacket. There is a hood and extended neck guard and the jacket closes with a YKK zip. There are also three front pockets attached to the The pocket is attached to the body with velcro and has a mesh back and zip opening. The fabric is wind and water resistant and all pockets are 100% waterproof. There is also a detachable C.P. badge that can be attached to the front of the back. There is a total of five separate parts to this jacket: body of jacket, detachable pocket, two trouser legs and detachable C.P. badge.
Country of Design: Italy
Country of Manufacture: Italy
Keywords: Urban, city, commuter, protective clothing, full body protection, transformable C.P. Company
C.P. Company Urban Protection Jacket with Detachable Trousers
2018.6 · Item · A/W 2000
Part of Westminster Menswear Archive
Black water resistant jacket with transformable features. The main feature of the jacket is the large detachable pouch on the left hand side which contains a pair of waterproof trouser legs that can be attached to the hem of the jacket. There is a hood and extended neck guard and the jacket closes with a YKK zip. There are also three front pockets attached to the The pocket is attached to the body with velcro and has a mesh back and zip opening. The fabric is wind and water resistant and all pockets are 100% waterproof. There is also a detachable C.P. badge that can be attached to the front of the back. There is a total of five separate parts to this jacket: body of jacket, detachable pocket, two trouser legs and detachable C.P. badge.
Country of Design: Italy
Country of Manufacture: Italy
Keywords: Urban, city, commuter, protective clothing, full body protection, transformable C.P. Company
C.P. Company Urban Protection Amaca Hammock Cape
2018.48.2 · Item · 2001
Part of Westminster Menswear Archive
Long olive green nylon cape with zip front and hood transformable with velcro C.P. Company label. The hood and torso is lined in black fleece polyester and the lower part in black mesh. The top and bottom of the cape have heavy nylon tape loops which can be hung to create a hammock. It has drawstring fastenings around the neck area with a pull stop at the back and one on each side at the bottom which gathers the side seams (the two pull stops are missing). The bottom hem can be folded up and fastened with press studs to secure the tape loop, the top loop can be secured with a velcro fastening tab on the top of the hood. It has two welted vertical openings on the front which have internal zip fastenings, an internal mesh pocket, and three patch pockets on the back set at an angle which fasten with velcro.
Country of Design: Italy
Country of Manufacture: Italy
Keywords: Transformable, hammock, protective Ferrari, Moreno
C.P. Company Dark Green Coated Jacket
2018.115 · Item · Spring Summer 2000
Part of Westminster Menswear Archive
Dark green coated jacket with stand up collar and detachable C.P. Company patch. A large black metal Lampo zip with a black fabric puller forms the front closure. The jacket has top stitch detailing all over, including two lines either side of the zip and a double stitched hem. It has two pockets inserted into the side seams and finished with bar tacks and top stitching. The jacket is unlined but the shell fabric is backed with a grey fleece-like cotton acrylic mix. The cuffs are finished with C.P. Company black matte press studs. The black vinyl C.P. company patch is attached with velcro just above the hem on the front left side. Label in the back of the neck. Care label in left side seam.
Country of Design: Italy
Country of Manufacture: Italy Ferrari, Moreno