Showing 15 results

Archival description
1 results with digital objects Show results with digital objects
2016.287.1 · Item · 2000
Part of Westminster Menswear Archive
Jacket made from heavyweight black nylon with a black polyester fleece lining. It fastens at the front with a black Lampo zipper, long central chest pocket, zip fastening handwarmer pockets and stowaway hood. Square detachable 'C.P. Company' badge on right chest. Accessorised with a small olive green battery operated torch (WMA.2016.287.2) which attaches to the front of the jacket.
Country of Design: Italy
Country of Manufacture: Italy
C.P. Company
2017.131 · Item · Spring Summer 2000
Part of Westminster Menswear Archive

Dark olive green coat with multiple pockets and a hood, made of nylon with a polyurethane coating. The hood is lined in the same fabric as the outer coat and has a black tape drawstring around the neck. The coat closes centre front with a heavy black Lampo zip with black tape pull tab and velcro tabs down the storm flap. It has four large bellows pockets with flaps on the front. The top two pockets also have side zip openings with tape pull tabs. There is a small bellows pocket with flap on the left shoulder and the right upper arm. The left arm has a small patch pocket with zip on the upper outside. The sleeve cuffs close with velcro tabs.

Each side of the coat has a large bellows pocket with a flap and there is a long patch pocket across the whole lower back with a rounded edged flap. The waist and bottom edge can be drawn in with black webbing tapes.

The upper chest and back are lined with the same fabric as the outer coat. The inside right chest has a flat zipped pocket, the inside left chest has an open flat pocket with velcro fastening. There is a large patch pocket across the lower back of the inside with a velcro fastening, and two smaller open pockets on each side.
Size 52
Country of Design: Italy
Country of Manufacture: Romania

C.P. Company
2017.241.1 · Item · A/W 1998
Part of Westminster Menswear Archive
Black coat with four front flap pockets, coulisse buckle fastening waist belt, and a high standing wind resistant collar with removable hood. Jacket features an innovative personal safety device that the wearer could activate by pulling a cord that was inserted through a specially constructed pocket. Detachable velcro fastening 'C.P. Company' brand patch. Made from Dynalfil TS-70 bonded to a nylon base, with a detachable black high-density double fleece lining.
Country of Design: Italy
Country of Manufacture: Italy
C.P. Company
2017.242 · Item · 2000
Part of Westminster Menswear Archive
Black parka style coat or jacket with four vertical 'anti-wind' weather protection pockets fastening with velcro, two each side of centre front zip fastening. Cuffs ending by fleece half-mittens, nylon mesh big inner pockets. Detachable C.P. Company logo. Protective fabric in Dynafil TS-70 on nylon base, anti-rip, anti-abrasion, oil and waterproof. High-density double fleece lining. One of C.P. Company's Uban Protection line, this model was called 'Glove' and could be worn with an additional multi-pocketed waistcoat which came with an aluminium foldable scooter designed by Micro. With these extra accessories, the coat was called 'Move'.
Country of Design: Italy
Country of Manufacture: Italy
C.P. Company
2017.342 · Item · A/W 2000
Part of Westminster Menswear Archive
Dark olive green smock with attached hood. The neck opening fastens with a press stud and velcro and the hood has a drawstring around the inside. The front of the smock has a large patch pocket in Dynalfil TS-70 with a flap to the lower left front which fastens with velcro and has a plastic carabiner clip attached to the top. The smock has a long black zip which runs from the right inside sleeve cuff to the armhole and down the side seam. There is a removable C.P. Company badge in black to the right lower front. The cuffs fasten with velcro tabs.
Country of Design: Italy
Country of Manufacture: Italy
C.P. Company
2018.115 · Item · Spring Summer 2000
Part of Westminster Menswear Archive
Dark green coated jacket with stand up collar and detachable C.P. Company patch. A large black metal Lampo zip with a black fabric puller forms the front closure. The jacket has top stitch detailing all over, including two lines either side of the zip and a double stitched hem. It has two pockets inserted into the side seams and finished with bar tacks and top stitching. The jacket is unlined but the shell fabric is backed with a grey fleece-like cotton acrylic mix. The cuffs are finished with C.P. Company black matte press studs. The black vinyl C.P. company patch is attached with velcro just above the hem on the front left side. Label in the back of the neck. Care label in left side seam.
Country of Design: Italy
Country of Manufacture: Italy
Ferrari, Moreno
2018.48.2 · Item · 2001
Part of Westminster Menswear Archive
Long olive green nylon cape with zip front and hood transformable with velcro C.P. Company label. The hood and torso is lined in black fleece polyester and the lower part in black mesh. The top and bottom of the cape have heavy nylon tape loops which can be hung to create a hammock. It has drawstring fastenings around the neck area with a pull stop at the back and one on each side at the bottom which gathers the side seams (the two pull stops are missing). The bottom hem can be folded up and fastened with press studs to secure the tape loop, the top loop can be secured with a velcro fastening tab on the top of the hood. It has two welted vertical openings on the front which have internal zip fastenings, an internal mesh pocket, and three patch pockets on the back set at an angle which fasten with velcro.
Country of Design: Italy
Country of Manufacture: Italy
Keywords: Transformable, hammock, protective
Ferrari, Moreno
2018.6 · Item · A/W 2000
Part of Westminster Menswear Archive
Black water resistant jacket with transformable features. The main feature of the jacket is the large detachable pouch on the left hand side which contains a pair of waterproof trouser legs that can be attached to the hem of the jacket. There is a hood and extended neck guard and the jacket closes with a YKK zip. There are also three front pockets attached to the The pocket is attached to the body with velcro and has a mesh back and zip opening. The fabric is wind and water resistant and all pockets are 100% waterproof. There is also a detachable C.P. badge that can be attached to the front of the back. There is a total of five separate parts to this jacket: body of jacket, detachable pocket, two trouser legs and detachable C.P. badge.
Country of Design: Italy
Country of Manufacture: Italy
Keywords: Urban, city, commuter, protective clothing, full body protection, transformable
C.P. Company
2018.6.Front · Piece · A/W 2000
Part of Westminster Menswear Archive
Black water resistant jacket with transformable features. The main feature of the jacket is the large detachable pouch on the left hand side which contains a pair of waterproof trouser legs that can be attached to the hem of the jacket. There is a hood and extended neck guard and the jacket closes with a YKK zip. There are also three front pockets attached to the The pocket is attached to the body with velcro and has a mesh back and zip opening. The fabric is wind and water resistant and all pockets are 100% waterproof. There is also a detachable C.P. badge that can be attached to the front of the back. There is a total of five separate parts to this jacket: body of jacket, detachable pocket, two trouser legs and detachable C.P. badge.
Country of Design: Italy
Country of Manufacture: Italy
Keywords: Urban, city, commuter, protective clothing, full body protection, transformable
C.P. Company
2018.86 · Item · 1999
Part of Westminster Menswear Archive

C.P. Company Urban Protection Atlas Jacket in black nylon that features an inflatable collar, with the inflatable device primarily designed to be removed from the body of the jacket and worn around the neck as a pillow when travelling. This can be removed from the high neck collar via a zip closure which runs along the top of the collar. The piece has slit pockets with popper closures on the front and four hidden pockets at the side that are secured with velcro which are ideally suited to its use as a travel jacket. There is also one large internal pocket that sits at the hem on the left side with velcro closure. Every pocket is lined with fleece. The cuffs have a single popper closure on each side and each popper is emblazoned with 'C.P. Company'. The jacket has a high-density double fleece lining and a detachable C.P. Company brand patch on the collar. The protective shell is made of Dynalfil TS-70 bonded to a nylon base, making the garment abrasion and rip-resistant as well and waterproof.

Country of Design: Italy
Country of Manufacture: Italy
Keywords: Urban protection

C.P. Company