Design feature

Elements area

Taxonomy

Code

Scope note(s)

    Source note(s)

      Display note(s)

        Hierarchical terms

        Design feature

        Equivalent terms

        Design feature

          Associated terms

          Design feature

            82 Archival description results for Design feature

            2019.111 · Item · 1986
            Part of Westminster Menswear Archive

            Black PVC inflatable jacket with a stand collar and hood. Across the back is printed in white lettering: 'MICHIKO LONDON / KOSHINO / DO NOT CLOSE TO FIRE / DO NOT SWIM / YOU CAN WEAR IN THE RAIN'. The collar has a zip at the back that the hood folds into. It fastens centre front with five metal press studs and has a draw cord around the bottom hem. There are two large patch pockets with flaps at the waist and it has clear plastic nozzles on the arms and sides to be blown into to inflate the jacket. There are five wide horizontal inflatable channels across the back, two across each arm, four across the chest and two large inflatable panels under the pockets. Welded or sealed seams.

            Small black drawstring bag for storage printed in white lettering on one side: 'MICHIKOLONDON / KOSHINO / DO NOT CLOSE TO FIRE / DO NOT SWIM / YOU CAN WEAR IN THE RAIN'.

            Michiko Koshino
            2019.101.3 · Item · Spring Summer 2018
            Part of Westminster Menswear Archive
            Hooded black sweatshirt in cotton jersey and printed in white with the Peter Saville design for the cover of Joy Division's Unknown Pleasures album which was based on a graphic representation of the dying star CP1919. It is slashed diagonally right to left across front and back from lower rib to shoulder, separating the top and bottom of the garment. It fastens together at the left shoulder and right side seam with press studs. The hood has a black drawcord for adjustment. Raf Simons
            2019.93 · Item · 2019
            Part of Westminster Menswear Archive

            Short purple coat with down feather interlining, pink lining and hood (production sample including re-used linings from left-over fabric from previous seasons). The parka has ultrasonic welded seams. It closes centre front with a zip and a double flap wind protection covering which closes with magnetic fastenings. At the neck of the hood are two purple '7L' press stud fastenings and there is one at the bottom hem. Each side has two waterproof zipped pockets, one horizontal, one vertical. The end of all zips have a matt garage to ensure waterproof quality. There is also an invisible zipped pocket above the vertical pocket.

            The hood has a stiff peak insert, and two stoppered elastic draw cords. There is another draw cord around the waist, which feeds down a channel sewn into the centre front facing. There is a channel pocket across the back, which closes with a zip on each end. The inside lining has a removable elasticated waist snow skirt which fastens at the front with four snap fasteners. There are inside zipped pockets on each side and a headphone hole on the left. The sleeve cuffs have a cotton elastane grey inner layer mitten with thumb hole.
            Country of Design: England
            Country of Manufacture: China (garment), Switzerland (fabric)
            Manufactured in Shenzhen, China by A-Garment.

            7L
            2019.34 · Item · 2018
            Part of Westminster Menswear Archive
            Orange inflatable Jacket with heat bonded divided sections. All garment seams are heat bonded. The top half of each body is divided into three and inflates from the shoulder. The lower half is one larger section with a heat-bonded pocket in the centre. Each sleeve is separated into three sections on front and back, inflating at the shoulder. The collar has a zip around, enclosing a one-piece hood. The back is one large piece, divided with nine lines, inflating on the right shoulder. Across the lower back is printed in reflective silver lettering 'INFLATABLE AIR STATION. Do not close to fire. Do not swim. You can wear in the rain. Michiko London Koshino. The jacket comes with a drawstring bag with the same text at a smaller scaler. The centre front closes with silver poppers. Made in Japan Michiko Koshino
            Chipie Hooded Jacket
            2016.292 · Item · c.1988
            Part of Westminster Menswear Archive
            Red wool and polyamide mix jacket with hood. The hood has a drawstring and the jacket closes centre front with a zip and press studs with 'CHIPIE Watch the W[?]' on them. It is lined yellow, black and red check wool mix fabric. The label has an image of a mountain and 'CHIPIE Bighorns Mountain'. Size M.
            Country of Design: France
            Chipie
            2016.287.1 · Item · 2000
            Part of Westminster Menswear Archive
            Jacket made from heavyweight black nylon with a black polyester fleece lining. It fastens at the front with a black Lampo zipper, long central chest pocket, zip fastening handwarmer pockets and stowaway hood. Square detachable 'C.P. Company' badge on right chest. Accessorised with a small olive green battery operated torch (WMA.2016.287.2) which attaches to the front of the jacket.
            Country of Design: Italy
            Country of Manufacture: Italy
            C.P. Company
            2016.257 · Item · 30-Nov-44
            Part of Westminster Menswear Archive

            Olive drab pullover hooded parka made of synthetic resin coated cotton cloth. Large front placket opening fastening with four spring loaded metal hooks and eyes. The hood and waist have drawstring cords. Cotton tape to cuffs with 13-star metal buttons and two buttonholes. Size Medium

            Country of Design: United States
            Country of Manufacture: United States
            Keywords: Military uniform, rain wear

            United States Navy
            Boneville Hooded Jacket
            2018.90 · Item
            Part of Westminster Menswear Archive
            Purple hooded casual jacket with a front zip fastening and five black 'Navy Arctic' buttons and two 'BNV' poppers at the top. The hood has a stitched peak, blue drawstrings and air vents covered with a top stitched opening. It is lined with a blue cotton drill and there is an adjustable buckle strap at the crown of the hood. It features two front waterproof fold down pockets with popper closures. The cuffs have a single strap with a single 'Navy Arctic' button closure on each side. The body of the jacket has a lilac dimond quilted lining and a blue internal drawstring at the waist. The sleeves have a diamond gusset and there are two vent holes in each underarm and lower side seam. There is a dropped centre front seam detail..
            Country of Design: Italy
            Country of Manufacture: Italy
            Boneville
            2018.92 · Item · 1987-1995
            Part of Westminster Menswear Archive
            Blue irridescent hooded jacket with grey chunky rib knit detailing on hood and cuffs. The hood can be rolled back and secured with poppers to form a padded collar. The jacket had a zip stand with a facing that closes with three buttons. The hood has a tab with a double button closures. There are two front top pockets and two slant chest pockets with flaps and brass button closures. It has a waisted top stitch detail that runs around the back and front of the jacket. It has a white cotton padded lining with a Navy Arctic deep sea diving helmet motif and bue diamond background.
            Country of Design: Italy
            Country of Manufacture: Italy
            C.P. Company